CCS GRADE DH32 has the high yield strength and tensile strength. GRADE DH32 angle steel is mainly used to build and repair ship and vessels and other steel structures, and also used in industrial maintenance, agricultural implements, transportation equipment, etc.
Yield strength (≥Mpa) |
Tensile strength (Mpa)
|
Elongation in ≥,%
| |
315
|
440-590
|
200mm
|
50mm
|
19
|
22
|
Chemical composition for CCS Grade DH32 ship steel (Heat Analysis Max %)
Main chemical elements composition of CCS Grade DH32 | ||||||
C
|
Si
|
Mn
|
P
|
S
|
Al (acid) min.
|
Nb
|
0.18
|
0.10-0.50
|
0.90-1.60
|
0.035
|
0.035
|
0.015
|
0.02-0.05
|
V
|
Ti
|
Cu
|
Cr
|
Ni
|
Mo
| |
0.05-0.10
|
0.02
|
0.35
|
0.20
|
0.40
|
0.08
|
Steel Standard: ASTM,JIS G3192,ABS,LR,GL,BV,KR,DNV,NK,RINA,CCS
Length: 5000mm-13000mm
Equal-leg angles: 75*75*6mm-250*250*35mm
Unequal-leg angles: 100*75*7mm-200*100*16mm
Inverted angles: 200*90*9*14mm-450*125*11.5*18mm
We can supply any size based on customer's requirements
Surface Treatment: Hot rolled or Shot blasting and painting
Supply Ability: 50000 Tons per month
Additional service: Shot blasting and painting, Cutting and welding as per user’s request.
Length: 5000mm-13000mm
Equal-leg angles: 75*75*6mm-250*250*35mm
Unequal-leg angles: 100*75*7mm-200*100*16mm
Inverted angles: 200*90*9*14mm-450*125*11.5*18mm
We can supply any size based on customer's requirements
Surface Treatment: Hot rolled or Shot blasting and painting
Supply Ability: 50000 Tons per month
Additional service: Shot blasting and painting, Cutting and welding as per user’s request.
Technical Requirements Additional Services of GRADE DH32 angle steel:
1,High tension test
2,Z-Test (Z15,Z25,Z35)
3, Low temperature impacting test
4, Ultrasonic test under ASTM A435,A577,A578
5, Certificated by ABS,LR,GL,BV,DNV,KR,NK,CCS,RINA
6, Issued Original Mill test certificate under EN 10204 FORMAT 3.1/3.2
7,Shot blasting and Painting, Cutting and welding as per end user’s demands
2,Z-Test (Z15,Z25,Z35)
3, Low temperature impacting test
4, Ultrasonic test under ASTM A435,A577,A578
5, Certificated by ABS,LR,GL,BV,DNV,KR,NK,CCS,RINA
6, Issued Original Mill test certificate under EN 10204 FORMAT 3.1/3.2
7,Shot blasting and Painting, Cutting and welding as per end user’s demands
learn more:http://www.section-steel.com/News/High-Strength-CCS-GRADE-DH32-Angle-Steel-Heat-Analysis.html
TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or liulucy.0212@gmail.com
Fax :0086-21-61182425
E-mail:service3@katalor.com or liulucy.0212@gmail.com
skype:lisa.liu6282
没有评论:
发表评论