GRADE D36 angle steel has good toughness properties, higher strength and are mainly used to contribute hull of ships and the cranes of break bulker and vessels in low temperature oceans
DNV GRADE D36 Chemical Composition and Mechanical Property:
Grade | Chemical Composition (%) | |||||
C | Mn | Si | P | S | ||
DNV D36 | 0.21 | 1.70 | 0.10-0.55 | 0.035 | 0.035 | |
Grade | Mechanical Property | |||||
Tensile Strength(MPa) | Yield Strength(MPa) | % Elongation in 2 in.(50mm) min | Impacting Test Temperature(°C) | |||
DNV D36 | 490-620 | 355 | 21 | -20 |
Grade | Fine grains elements | category | The thickness of steel | |||||
≤ 12 | 12.5-20 | 20-25 | 25-35 | 35-50 | 50-100 | |||
DH36 | Nb+V or V | Plate/sheet | A(50) | N(50),CR(50),TM(50) | N(50),CR(25),TM(50) | |||
Profile steel | N(50),CR(50),TM(50),AR*(25) | - | ||||||
Al or Al+Ti | Plate/sheet | A(50) | AR*(25) | - | ||||
N(50),CR(50),TM(50) | N(50),CR(25),TM(50) | |||||||
Profile steel | A(50) | N(50),CR(50),TM(50),AR*(25) | - |
DNV GRADE D36Additional Condition:
UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.
TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or liulucy.0212@gmail.com
Fax :0086-21-61182425
E-mail:service3@katalor.com or liulucy.0212@gmail.com
skype:lisa.liu6282
没有评论:
发表评论