CCS GRADE A36 Angle Steel for Construction, Machines and Towers

CCS GRADE A36has excellent welding properties and is suitable for grinding, punching, tap, drilling and machining processes. ASTM A36 is usually available in forms of Rectangle bar, Square bar, Circular rod, Steel shapes such as channels, angles, H-beams and I-beams.

CCS GRADE A36 Chemical Composition

Element	Content
Carbon, C	0.25 - 0.290 %
Copper, Cu	0.20 %
Iron, Fe	98.0 %
Manganese, Mn	1.03 %
Phosphorous, P	0.040 %
Silicon, Si	0.280 %
Sulfur, S	0.050 %

GRADE A36 angle steel Physical Properties

Physical Properties	Metric	Imperial
Density	7.85 g/cm3	0.284 lb/in3

Mechanical Properties of CCS GRADE A36 angle steel

Mechanical Properties	Metric	Imperial
Tensile Strength, Ultimate	400 - 550 MPa	58000 - 79800 psi
Tensile Strength, Yield	250 MPa	36300 psi
Elongation at Break (in 200 mm)	20.0 %	20.0 %
Elongation at Break (in 50 mm)	23.0 %	23.0 %
Modulus of Elasticity	200 GPa	29000 ksi
Bulk Modulus (typical for steel)	140 GPa	20300 ksi
Poissons Ratio	0.260	0.260
Shear Modulus	79.3 GPa	11500 ksi

ASTM A36 steel has the following applications:

1, It is used for various parts obtained by flame cutting such as in parking garages, walkways, boat landing ramps and trenches.
2, It is used in forming tanks, bins, bearing plates, fixtures, rings, templates, jigs, sprockets, cams, gears, base plates, forgings, ornamental works, stakes, brackets, automotive and agricultural equipment, frames, machinery parts.

A36 structural steel angle features benefits:

1, Low-cost material compared to HSLA steels.
2, General for construction industrial applications.
3, Galvanized A36 steel angles increase resistance to corrosion.

learn more:http://www.section-steel.com/News/CCS-GRADE-A36-Angle-Steel-for-Construction-Machines-and-Towers.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or liulucy.0212@gmail.com

skype:lisa.liu6282