An H-beam, also known as I-beam, Weam (for wide flange), Universal Beam (UB), Rolled Steel Joist (RSJ), or double-T (especially in Polish, Bulgarian, Spanish, Italian and German), is a beam with anI - or H-shaped cross-section. S355JR, S355J0, S355J2 H Beams are usually made of structural steel and are used in construction and civil engineering.
| Grade: | S355JR |
| Standard: | EN10025-2:2004 Technicaldeliveryconditionsfornon-alloystructuralsteels |
| Classification: | Non-alloystructuralsteels |
Chemical composition % of the ladle analysis of grade S355JR
| Nominalthickness=<30(mm)CEVmax=0.45 | |||||||
| C | Si | Mn | P | S | N | Cu | CEV |
| max0.24 | max0.55 | max1.6 | max0.04 | max0.04 | max0.012 | max0.55 | max0.47 |
Mechanical properties of grade S355JR
| Nominalthickness(mm) | to16 | 16-40 | 40-63 | 63-80 | 80-100 | 100-125 |
| ReH-Minimumyieldstrength(MPa) | 355 | 345 | 335 | 325 | 315 | 295 |
| Temperature | -20 | 0 | 20 |
| Notchimpacttest.Min.absorbedenergy | 27 | 27 | 27 |
Size range: HE100-500, IPE140-500, HP305
Length: from 6m to 12m
We can supply any size based on customer's requirements.
Standard: EN10034, EN10025
Material: S235J0 S235J2 S235JR S275JR S275J0 S275J2 S355J0 S355J2 S355JR S355J2+N
Length: from 6m to 12m
We can supply any size based on customer's requirements.
Standard: EN10034, EN10025
Material: S235J0 S235J2 S235JR S275JR S275J0 S275J2 S355J0 S355J2 S355JR S355J2+N
skype:lisa.liu6282
没有评论:
发表评论