2016年10月28日星期五

DIN 1.7225 / 42CrMo4 Steel Pipe Quenched and Tempered

42CrMo4 Steel Pipe is a common Chromium-Molybdenum alloy steel that usually used after quenched and tempered. It offers a very good balance of strength, toughness. DIN 42CrMo4 Steel Pipe is used for automotive and aircraft components with high toughness as axle journals, gears, push rods, ring gears etc.

DIN 1.7225 Steel Pipe Chemical Composition
C: 0.38-0.45; Si: max0.40; Mn: 0.60-0.90; P: max0.025; S: max0.035;
Cr: 0.90-1.20; Mo: 0.15-0.30;
Mechanical Properties of 1.7225 / 42CrMo4
Tensile strength: 1080MPa
Yield point: 930MPa
Percentage reduction of area after fracture: 45%
Elongation after fracture: 12%
Impact test (+20°C): Transverse – 22J;
42CrMo4 Steel Pipe HEAT TREATMENT:
1, Forging: Heat to 1150°C Hold until uniform. Minimum forging temperature 850°C.Cool slowly in ashes or sand etc.
2, Annealing: Heat to 830°C – 850°C. Cool in furnace.
3, Normalizing: Heat to 870°C – 900°C. Cool in still air.
4, Stress Relieving:
Annealed: Heat to 600°C – 650°C
Hardened: Heat to 500°C – 550°C.Cool in still air
Hardening: Heat to 830°C – 880°C. Quench in oil or polymer.
Tempering: Heat to 450°C – 700°C cool in still air.
Round bar
Size: Dia.80-1,000mm
Length: 3,000-10,000mm
Square bar
Size: 150×150-600×600mm
Length: 3,000-8,000mm
we can supply any size based on customer's requirements.
TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or
info@katalor.com
skype:lisa.liu6282

没有评论:

发表评论