B480GNQR Corten Steel Used for Outdoor Buildings

B480GNQR Corten Steel has good anti rust protection and welding ability and is used in shipping container, support frame of outside building etc. Remarkably enhances the anti-corrosive performance of the structural element, lengthens the structural element service life, B480GNQR Steel alsoused in manufacturing each kind of structural element which was used under the atmospheric environment and the caustic gas, the liquid environment.

Chemical Composition of B480GNQR

Grade	The Element Max (%)
	C	Mn	P	S	Si	Cu	Ni	Cr	Ti
B480GNQR	0.12	0.20-0.50	0.07-0.15	0.030	0.25-0.75	0.25-0.45	0.65	0.30-1.25	-

B480GNQR SteelHardness and Mechanical Properties

Grade	Thickness	Y.S	T.S	EL.A5	Bend 180°
	mm	MPa	MPa	%
B480GNQR	≤6	≥350	≥480	≥22	d=a
	> 6				d=2a

B480GNQR Corten Steel Delivery Terms

Standard: AISI, ASTM, GB
Grade: B480GNQR
Min Order Quantity: 25 Metric Ton/Metric Tons
Supply Ability:    5000 Metric Ton/Metric Tons per Month
Port: Main port in China
Payment Terms: L/C,T/T, Western Union

learn more:http://www.section-steel.com/News/B480GNQR-Corten-Steel-Used-for-Outdoor-Buildings.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or info@katalor.com

skype:lisa.liu6282

What are the Main Characteristics and Benefits of Weathering or Corten Steels?

 Corten Steel means that due to their chemical compositions COR-TEN A and COR-TEN B steels, when utilised unprotected, exhibits increased resistance to atmospheric corrosion compared to unalloyed steels.

The corrosion retarding effect of the protective layer is produced by the nature of its structure components and the particular distribution and concentration of alloying elements in it. The layer protecting the surface develops and regenerates continuously.

Chemical Composition of Weathering Steel (heat analysis, %)

Grade	C	Si	Mn	P	S	Cr	Cu	V	Ni
COR-TEN A	≤0.12	0.25-0.75	0.20-0.50	0.07-0.15	≤0.030	0.50-1.25	0.25-0.55		≤0.65
COR-TEN B	≤0.16	0.30-0.50	0.80-1.25	≤0.030	0.030	0.40-0.65	0.25-0.40	0.02-0.10	≤0.40

COR-TEN A Mechanical Properties

Grade	Minimum yield point ReH Mpa *)	Tensile strength Rm MPa	Minimum elongation A (Lo=5.65 √So) %
COR-TEN A	355	470 – 630	20

COR-TEN B Mechanical Properties

Grade	Material thickness mm	Minimum yield point ReH Mpa *)	Tensile strength Rm MPa	Minimum elongation A (Lo=5.65 √So) %
COR-TEN B	≤16	355	470-630	20
	> 16 ≤50	345

Applications of Weathering and Corten Steels

Weathering and corten steelis used for various types of welded, bolted and riveted constructions e.g. steel frame structures, bridges, tanks and containers, exhaust systems, vehicles and equipment constructions.

learn more:http://www.section-steel.com/News/What-are-the-Main-Characteristics-and-Benefits-of-Weathering-or-Corten-Steels.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or info@katalor.com

skype:lisa.liu6282

2016 Most Popular 24 Inch 20G Seamless Steel Pipe

20G Seamless Steel Pipeis applicable to seamless tubes for making steam boiler whose pressure is high or higher and seamless tubes used as pipelines. 24 Inch 20G Seamless Steel Pipe are widely used in fertilizer, petroleum, central-station, boiler, power station, shipping military, chemical industry, environment protection, traffic, metallurgy and mine, printing and dyeing, food industry, medical equipment, and so on. 

Chemical Compositions(%) of 20G：

Chemical elements	Data
Carbon	0.17-0.24
Silicon	0.17-0.37
Manganese	0.70-1.00
Phosphorus(max)	0.03
Sulfur(max)	0.03
Chromium(max)	0.25
Molybdenum(max)	0.15
Cuprum(max)	0.2
Nickel(max)	0.25
Vanadium(max)	0.08

Mechanical Properties of 20G：

Properties	Data
Yield Strength (Mpa)	≥415
Tensile Strength (Mpa)	240
Elongation (%)	22

20G Seamless Steel Pipe Product Details

Standard：ASTM A106 , ASTM A53 ,API5L B ,ASTM A179, ASTM A210 ,ANSI B36.10, GB 5310,GB6479,GB9948,GB/T17396GB 3087, GB/T 8162 ,GB/T8163
Outer Diameter：21.3-508mm
Wall Thickness：3-40mm
Length：6m, 12m or as per customer's requirements
Packing：In bundles tied with steel stripes
Payment Term：T/T, L/C at sight
Delivery Time：Within 30-60 days after signing the contract or as your requirement

learn more:http://construction-steel.com/News/2016-Most-Popular-24-Inch-20G-Seamless-Steel-Pipe.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or info@katalor.com

skype:lisa.liu6282

AISI1020 Low Carbon and Tensile Steel Physical Properties

AISI 1020 Low Carbon and Tensile Steel has high machinability, high strength, high ductility and good weld ability. It is normally used in turned and polished or cold drawn condition. 1020 Low Carbon steel is also used in a variety of applications due to its cold drawn or turned and polished finish property.

The chemical composition of AISI 1020 steel is:

Element	Content
Carbon, C	0.17 - 0.230 %
Iron, Fe	99.08 - 99.53 %
Manganese, Mn	0.30 - 0.60 %
Phosphorous, P	≤ 0.040 %
Sulfur, S	≤ 0.050 %

AISI1020 Steel Machinability
1020Tensile Steel Machinability is good at 65% compared to 1112 carbon steel as 100% baseline.
1020 Low Carbon Steel Weld ability
AISI 1020 can be welded by performing the most common welding processes. It has been suggested that the welding process should not be performed in heat treated or carburized condition.
AISI1020 Low Carbon Steel Heat Treatment

1020 may be hardened by heating to 1500 - 1600 F and then water quenching. The cost of doing any heat treatment to such a low carbon steel often precludes doing so for the modest return in mechanical properties obtained.
learn more:http://www.ice-steels.com/News/AISI1020-Low-Carbon-and-Tensile-Steel-Physical-Properties.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or info@katalor.com

skype:lisa.liu6282

GB/T1591 Q345 A/B/C/D/E Section Steel China Hot Sale Products

GB/T1591 Q345 A/B/C/D/E Section Steel is low alloy section steel with good mechanical properties, low temperature performance, plasticity and good weld ability, Q345 A/B/C/D/E Section Steel is mostly used in low pressure vessel, oil tank, vehicles, cranes, mining machinery, power stations, mechanical parts, building structure, general metal parts

Q345 Section Steel Chemical Composition:

Steel Standard	Steel Grade	Chemical Composition
		C≤	Mn	Si≤	P≤	S≤	V	Nb	Ti	Al≥
Q345	A	0.020	1.00~1.60	0.55	0.045	0.045	0.02~0.15	0.015~0.060	0.20	-
	B	0.020	1.00~1.60	0.55	0.040	0.040	0.02~0.15	0.015~0.060	0.20	-
	C	0.020	1.00~1.60	0.55	0.035	0.035	0.02~0.15	0.015~0.060	0.20	0.015
	D	0.020	1.00~1.60	0.55	0.030	0.030	0.02~0.15	0.015~0.060	0.20	0.015
	E	0.020	1.00~1.60	0.55	0.025	0.025	0.02~0.15	0.015~0.060	0.20	0.015

GB/T1591 Q345 Steel Mechanical Property:

Steel Standard	Steel Grade	Yield Strength Mpa	Tensile Stregth Map	Elongation%
Q345	A	345	470~630	21
	B	345	470~630	21
	C	345	470~630	22
	D	345	470~630	22
	E	345	470~630	22

Q345 A/B/C/D/E Section Steel Specification:

1. Grade: Q345, Q235 Series
2. Standard: GB/T ISO9001: 2000
3. Length: 6m-12m
4. Size: 25*25--250*250mm
We can supply any size based on customer's requirements.
5. Packing: In bundle or we can make sparking as your required
6. Payment term: T/T, L/C

learn more:http://www.section-steel.com/News/GBT1591-Q345-ABCDE-Section-Steel-China-Hot-Sale-Products.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or info@katalor.com

skype:lisa.liu6282

GB/T700 Q275A Section Steel Classification

GB/T700 Q275A Section Steel is normally rolled under AS rolled. We have more than 10 year experience in this business so we are able to provide you the high quality products with the best price.

Mechanical property for Q275A Section steel:

Thickness (mm)
Q275A	≤ 16	16 ≤ 40	40 ≤ 60	60 ≤ 100	100 ≤ 150	150
Yield strength (≥Mpa)	275	265	255	245	225	215
Tensile strength (Mpa)	410-540

Chemical composition for Q275A Section steel (Heat Analysis Max%)

Main chemical elements composition of Q275A
C	Si	Mn	P	S
0.24	0.35	1.50	0.045	0.045

GB/T700 Q275A Steel Details

1. Standard: GB/T3274, GB/T700
2. Shape: Hot rolled steel plate
3. Size: 6-130mm*1500-4100mm
We can supply any size based on customer's requirements
4. Productivity: 5000 metric tons/month
5. Delivery Date:45 days after received the deposits
6. Payment terms: T /T 30% in advance as deposit within 3 working days after the contract date, balance against the B/L copy.

Q275A Section Steel Technical Requirements Additional Services:

♦ Cutting and welding as per end user’s demands
♦ Issued Original Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Ultrasonic test under GB/T2970,JB4730,EN 10160,ASTM A435,A577,A578
♦Low temperature impacting test

learn more;http://www.section-steel.com/News/GBT700-Q275A-Section-Steel-Classification.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or info@katalor.com

skype:lisa.liu6282

DIN 1.7225 / 42CrMo4 Steel Pipe Quenched and Tempered

42CrMo4 Steel Pipe is a common Chromium-Molybdenum alloy steel that usually used after quenched and tempered. It offers a very good balance of strength, toughness. DIN 42CrMo4 Steel Pipe is used for automotive and aircraft components with high toughness as axle journals, gears, push rods, ring gears etc.

DIN 1.7225 Steel Pipe Chemical Composition

C: 0.38-0.45; Si: max0.40; Mn: 0.60-0.90; P: max0.025; S: max0.035;
Cr: 0.90-1.20; Mo: 0.15-0.30;

Mechanical Properties of 1.7225 / 42CrMo4

Tensile strength: 1080MPa
Yield point: 930MPa
Percentage reduction of area after fracture: 45%
Elongation after fracture: 12%
Impact test (+20°C): Transverse – 22J;

42CrMo4 Steel Pipe HEAT TREATMENT:

1, Forging: Heat to 1150°C Hold until uniform. Minimum forging temperature 850°C.Cool slowly in ashes or sand etc.
2, Annealing: Heat to 830°C – 850°C. Cool in furnace.
3, Normalizing: Heat to 870°C – 900°C. Cool in still air.
4, Stress Relieving:
Annealed: Heat to 600°C – 650°C
Hardened: Heat to 500°C – 550°C.Cool in still air
Hardening: Heat to 830°C – 880°C. Quench in oil or polymer.
Tempering: Heat to 450°C – 700°C cool in still air.

Size of 42CrMo4

Round bar
Size: Dia.80-1,000mm
Length: 3,000-10,000mm
Square bar
Size: 150×150-600×600mm
Length: 3,000-8,000mm
we can supply any size based on customer's requirements.

learn more:http://construction-steel.com/News/DIN-17225-42CrMo4-Steel-Pipe-Quenched-and-Tempered.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or info@katalor.com

skype:lisa.liu6282

DIN 1.7220/34CrMo4 Steel Plate Chemical Element

 34CrMo4 Steel Plate are generally intended for fabrication of quenched and tempered, flame or induction hardened machine parts. DIN 34CrMo4 steel is used in chemical pump, plunger pumps, pressure vessel, air receivers, Shell Tube Heat Exchangers.

Chemical Composition of 34CrMo4 steel Plate

grade	C	Si	Mn	P	S	Cr	Mo
34CrMo4	0.30-0.37	≤0.40	0.60-0.90	≤0.035	≤0.035	0.90-1.20	0.15-0.30

Mechanical Property of DIN 34CrMo4 steel Plate

34CrMo4	Yield Strength Re/MPa-（Min）	Tensile Strength Rm/M-Pa	Elongation A/% (Min）	Reduction of arean Z/%(Min)	KV/J(Min)
≤8mm	800	1000-1200	11	45	35
8mm＜t≤20mm	650	900-1100	12	50	40
20＜t≤60mm	550	800-950	14	55	45
60＜t≤100mm	500	750-950	15	55	45
100＜t≤160mm	450	700-850	15	60	45

DIN 34CrMo4 Specification:

Deep Hole ole drilling: length max 9.8 meters.
Range of work
Round bar steel: 1mm to 2000mm
Square-shape steel: 10mm to 1000mm
Steel Plate/sheet: 0.08mm to 800mm
Width: 10mm to 1500mm
We can supply any size based on customer's requirements.

learn more:http://construction-steel.com/News/DIN-1722034CrMo4-Steel-Plate-Chemical-Element.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or info@katalor.com

skype:lisa.liu6282

What is the Difference between GB/T700 Q195, Q215, Q235 Carbon H Beam

GB/T700 Q195, Q215, Q235 Carbon H Beam is the most widely used in steel, the largest number, often rolled into steel, shapes and profiles, the general does not require the direct use of heat treated, mainly for general structural and engineering.

The Chemical Composition Mechanical Properties of Q195, Q215, Q235

	Chemical Composition %					Mechanical Properties
Steel Brand	C	Si	Mn	P	S	Elongation %	Yield Strength Mpa	Tensile Strength Mpa
Q195	0.06-0.12	<=0.30	0.25-0.50	<=0.045	<=0.050	>=33	>=195	315-430
Q215	0.09-0.15	<=0.30	0.25-0.55	<=0.045	<=0.050	>=31	>=215	335-450
Q235	0.14-0.22	<=0.30	0.30-0.65	<=0.045	<=0.050	>=26	>=235	375-500

GB/T700 Q195, Q215, Q235 H Beam Specification

Standards：GB/T709-2006, ASTM A36, JIS G3101, DIN EN 10025, SAE 1045, ASTM A570
Name：Q195, Q215, Q235, Q255, Q275 carbon steel
Width: 1500-3600mm or 1500, 1800, 2000, 2200mm
Thickness: 4mm-600mm
Length：7-10m
We can supply any size based on customer's special requirements;

Other Terms of GB/T700 Q195, Q215, Q235

◆Packaging Details: Standard export seaworthy packing or as required.
◆Delivery Time: 20-30 days, 5-7 days for stock goods.
◆Loading Port: Shanghai, Tianjin, Qingdao.
◆Offer Ability: 5 000MT/Per Month.

learn more:http://www.section-steel.com/News/What-is-the-Difference-between-GBT700-Q195-Q215-Q235-Carbon-H-Beam.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or info@katalor.com

skype:lisa.liu6282

Standard ASTM A572 Gr.42/50/60/65 H beam for Construction

 ASTM A572 Gr.42/50/60/65 H beam is usually used in Industrial structure of the steel structure bearing bracket, Underground engineering steel pile and retaining structure. ASTM A572 Gr.42/50/60/65 H beam also used in Petrochemical and electric power and Large span steel bridge components.

A572 Gr.42/50/60/65 H beam chemical composition : %

Grade	Thickness (mm)	C≤	Mn≤	P≤	S≤	Si≤		Alloy composition
						≤40	＞40
42(290)	150	0.21	1.35	0.040	0.05	0.40	0.15~0.40	I-Nb:0.005~0.05 II-V:0.01~0.15 III-Nb+V:0.02~0.15 IV-N: ≤ 0.05(V: N=1/4)
50(345)	100	0.23	1.35	0.040	0.05	0.40	0.15~0.40
60(415)	32	0.26	1.3	0.040	0.05	0.40	-
65(450)	＞13~32	0.23	1.65	0.040	0.05	0.40	-
	≤13	0.26	1.35	0.040	0.05	0.40	-

ASTM A572 Gr.42/50/60/65 Steel Specification:

Product：H beam
Standard：AISI, ASTM, BS, DIN, GB, JIS, EN, etc
Height：100-900mm
Web Thick：4.5-20mm
Flange Width：75-350mm
Flange Thick：7-35mm
Length：5.8m,6m,9m,11.8m,12m or as your requirement
We can supply any size based on customer's requirements.
Inspection：BV, SGS, MTC, ISO, etc.
Technique：Hot-rolled and High frequency welded

Packing and Delivery Details of A572 Gr.42/50/60/65 H beam

Packing：In bulk or container, Standard seaworthy packing or as your required
Trade Terms：FOB, CFR, CIF
Payment Term：30%T/T, balance paid within 7 days after shipment.100% L/C At Sight
Delivery Time：10-25days after receiving the deposit

learn more:http://www.section-steel.com/News/Standard-ASTM-A572-Gr42506065-H-beam-for-Construction.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or info@katalor.com

skype:lisa.liu6282

35GrMo Seamless Steel Pipe Mechanical Property of Concrete

35GrMo Seamless Steel Pipe can used to produce all kinds of alloy structure and its components, such as boiler super heater collection box, large caliber pipe harden component. 35GrMo Steel Pipe also used in structural pipe, fluid pipe, boiler pipe, drill pipe, oil and gas, hydraulic pipe and so on.

35CrMo Steel Chemical Composition

Grade	The Element Max (%)
	C	Si	Mn	P	S
35CrMo	0.32~0.40	0.17~0.37	0.40~0.70	0.035	0.035

35GrMo Steel Pipe Mechanical Property

Grade		35CrMo Mechanical Property
	Thickness	Yield	Tensile	HB
35CrMo	mm	Min Mpa	Mpa	HB
	6-50	835	980
	50-200	835	980

35GrMo Steel Pipe Specification

Grade：API J55-API P110, Q195-Q345, API J55, API K55, API L80, API N80, API P110, Q215
Manufacturing Method：Cold drawn, cold rolled, hot rolled, ERW, SAW, EFW, LASW
Outer Diameter：20-1420mm
Wall Thickness：6-150mm
Length：2-10m
We can supply any size based on customer's requirements.

35GrMo Steel Pipe Technical Details

1, Delivery condition: Hot-rolled, black surface.Hot forged +Rough machined (black surface after Q/T) + Turned (optional), Cold-drawn Condition, Q+T with black surface.
2, Technical Data: According to the customer's requirement of Chemical Composition, Physical Properties and Mechanical Testing.
3, Test: ultrasonic test according to SEP 1921-84 3C/c

learn more:http://construction-steel.com/News/35GrMo-Seamless-Steel-Pipe-Mechanical-Property-of-Concrete.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or info@katalor.com

skype:lisa.liu6282

DIN 1.7218 25CrMo4 Steel Pipe Tolerance on Dimension

 25CrMo4 Steel Pipe is a common Chromium Molybdenum alloy steel as per. DIN Standard. 25CrMo4 contains a lower carbon content compared with 42CrMo4. DIN 1.7218 25CrMo4 Steel will be freely machine able in the condition of HRC18-22. 25CrMo4 Steel Pipe can be used in the manufacture of the corrosive medium under carburizing and quenching condition.

DIN 1.7218 25CrMo4 steel pipe Chemical Composition

C: 0.22-0.29; Si: max0.40; Mn: 0.60-0.90; P: max0.025; S: max0.035;
Cr: 0.90-1.20; Mo: 0.15-0.30;

Mechanical Properties of 1.7218 / 25CrMo4 steel

Tensile strength: 930MPa
Yield point: 785MPa
Percentage reduction of area after fracture: 50%
Elongation after fracture: 12%
Impact test (+20°C): Transverse – 27~32J; Longitud – 45~50J

DIN 25CrMo4 steel pipe available size:

Round bar
Size: Dia.80-1,000mm
Length: 3,000-10,000mm
Square bar
Size: 150×150-500×500mm
Length: 3,000-8,000mm
We can supply any size based on customer's requirements

25CrMo4 Steel Pipe Quality Certificate

1)Chemical composition
2)Mechanical properties
3) Nonmetallic inclusions
4)Grain size: According to DIN 50601more than 5,preferred to 8;
5)Ultra sonic testing 360° complete round testing: Ultra sonic according to EN 10228-3

learn more:http://construction-steel.com/News/DIN-17218-25CrMo4-Steel-Pipe-Tolerance-on-Dimension.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or info@katalor.com

skype:lisa.liu6282