GB/T3094 10# Rectangular Hollow Section/Square Hollow Section Performance

10# Square Hollow Section Chemical Compositions

C ：0.07~0.13
Si：0.17～0.37
Mn：0.35～0.65
S ：≤0.035
P ：≤0.035
Cr：≤0.15
Ni：≤0.25
Cu：≤0.25

GB/T3094 10# Mechanical Property

Tensile strengthσb (MPa): ≥335
Yield strengthσs (MPa): ≥205
Elongation rateδ5 (%): ≥31
Section shrinkageψ(%): ≥55,
Hardness: no heat treatment,≤137HBs,
Sample size: sample size 25mm longitudinal

learn more:http://www.section-steel.com/News/GBT3094-10-Rectangular-Hollow-SectionSquare-Hollow-Section-Performance.html

JIS G4051-2005 S20C Steel Pipe Delivery Condition

JIS G4051-2005 S20C Chemical Composition（%）

C 0.18-0.23
Si 0.15-0.35
Mn 0.30-0.60
P≤0.030
S≤0.035

 JIS G4051-2005 S20C Application

S20C Steel Pipe is used to manufacture a variety of mechanical parts that do not bear to great stress and the same time require high toughness. S20C is used in the manufacture of surface hardness requirements and the heart of the little bit of carburizing in general machinery and automobiles, agricultural machinery.

learn more:http://www.section-steel.com/News/JIS-G40512005-S20C-Steel-Pipe-Delivery-Condition.html

42CrMo Alloy Steel Plate Current Stock Price

42CrMo Alloy can also instead of nickel-containing high-quality quenched and tempered steel

42CrMo Alloy Steel Plate Chemical Compositions

C ：0.38～0.45%
Si：0.17～0.37%
Mn：0.50～0.80%
S ：Allow residual content≤0.035%
P ：Allow residual content≤0.035%
Cr：0.90～1.20%
Ni：Allow residual content≤0.030%
Cu：Allow residual content≤0.030%
Mo：0.15～0.25%

The Main Features of 42CrMo Alloy Steel


The performance of 42CrMo Alloy Steel is close to 35CrMo. 42CrMo Alloy Steel Plate's strength and hardenability are better than 35CrMo due to the increase in carbon and chromium content. 42CrMo Alloy Steel Plate has a high fatigue strength and resistance to multiple impact capacity after quenched and tempered. Besides, its low temperature impact toughness is good, and it is no obvious tempering brittleness.

learn more:http://www.ice-steels.com/News/42CrMo-Alloy-Steel-Plate-Current-Stock-Price.html

TEL: 0086-21-61182423
Fax: 0086-21-61182425
E-mail:service3@katalor.com 

Skype: lisa.liu6282

11.30MM Thickness S355MC Steel Plate Wholesale Price

S355MC Steel Plate is widely used in bridges, vehicles, ships, construction, pressure vessels and so on.

Chemical Compositions of S355MC

Marking	Content of Elements - Mass [max%]
	C max	Si max	Mn max	P max	S max	Al-celk. max	Nb max	Ti max
S 355 MC	0.12	0.50	1.50	0.025	0.020	0.015	0.09	0.15

S355MC Steel Mechanical Property

Marking	Min. yield strength ReH 1] [MPa]	Tensile strength Rm[MPa]	Ductility [%]
			Min A80 <3mm	Min A6 ≥3mm
S 355 MC	355	430-550	19	23

learn more:http://www.section-steel.com/News/1130MM-Thickness-S355MC-Steel-Plate-Wholesale-Price.html

TEL: 0086-21-61182423
Fax: 0086-21-61182425
E-mail:service3@katalor.com  

Skype: lisa.liu6282

304 stainless steel pipe Manufacturing Process

304 stainless steel pipe Features

304 stainless steel has excellent corrosion resistance and good resistance to corrosion. 304 is most widely used stainless steel, heat-resistant steel and practical steel. It is mainly used for food production equipment, general chemical equipment, nuclear energy and so on.

Typical Chemical Properties of 304 stainless steel pipe

Carbon, Max %	0.03
Manganese, Max %	2.00
Phosphorus, Max %	0.045
Sulphur, Max %	0.03
Chromium, Max%	17.5
Nickel, Min%	8.0
Molybdenum, Max%	N/A

304 Steel Typical Mechanical Properties

Tensile Strength ksi	81
Yield 2% Offset ksi	37
Elongation in 2” (50.80mm)	55

learn more:http://www.section-steel.com/News/304-stainless-steel-pipe-Manufacturing-Process.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com  

skype:lisa.liu6282

EN 10028 P355NL1 Pressure Vessel and Boiler Steel Plate Steel Grade

P355NL1 Chemical Composition

Grade	The Element Max (%)
	C	Si	Mn	P	S	Al(min)	N
P355NL1	0.18	0.50	0.9-1.70	0.03	0.020		0.02
	Cr	Cu	Mo	Nb	Ni	Ti	V
	0.30	0.30	0.08	0.005	0.50	0.03	0.10

Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
P355NL1Mechanical Property

Grade	Thickness	Yield strength	Tensile strength	Elongation	Impact Energy(KV J) min
P355NL1	mm	Min Mpa	Mpa	Min %	-20°	0°	+20°
	≤ 16	355	490-630	22	47	55	63
	16> to ≤35	355	490-630	22	47	55	63
	35> to ≤50	345	490-630	22	47	55	63
	50> to ≤70	325	490-630	22	47	55	63
	70> to ≤100	315	470-610	21	47	55	63
	100> to ≤150	295	450-590	21	47	55	63

learn more:http://www.ice-steels.com/News/EN-10028-P355NL1-Pressure-Vessel-and-Boiler-Steel-Plate-Steel-Grade.html

TEL:0086-21-61182423

Fax :0086-21-61182425

E-mail:service3@katalor.com  

skype:lisa.liu6282

China Factory Price SA387GR11CL2 Press Vessel and Boiler Steel Plate

According to the different thickness and impact requirements, SA387 GR11CL2 steel plate's heat treatment choose normalized and tempered or normalized, accelerated cooling and tempered.

The Main Chemical Composition of SA387

Grade	Gr5 Cl2	Gr12 Cl2	Gr11 Cl2	Gr22 Cl2	Gr91
C	≤ 0.15	0.05-0.17	0.05-0.17	0.05-0.15	0.06-0.15
Mn	0.30-0.60	0.40-0.65	0.40-0.65	0.30-0.60	0.25-0.66
Si	≤ 0.50	0.15-0.40	0.50-0.80	≤ 0.50	0.18-0.56
P	≤ 0.035	≤ 0.035	≤ 0.035	≤ 0.035	≤ 0.020
S	≤ 0.035	≤ 0.035	≤ 0.035	≤ 0.035	≤ 0.010
Cr	4.00-6.00	0.80-1.15	1.00-1.50	2.00-2.50	8.00-9.50
Mo	0.45-0.65	0.45-0.60	0.45-0.60	0.90-1.10	0.85-1.05

SA387GR11CL2 Mechanical Property

Grade	Mechanical Property
	Tensile Strength(MPa)	Yield Strength(MPa)	% Elongation in 2 in.(50mm) min	Impacting Test Temperature(°C)
SA387 Grade 11 Class2(SA387GR11CL2)	0.35-0.73	310	22	-20,40,-60

learn more:http://www.ice-steels.com/News/China-Factory-Price-SA387GR11CL2-Press-Vessel-and-Boiler-Steel-Plate.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com  

skype:lisa.liu6282

GB11263-89 Q345E H Beam with Large Stock

Q345E H Beam is mainly used for Engineering machinery, mining machinery, metallurgical environmental protection, water conservancy and hydropower, rail equipment and other structural parts.

Chemical Composition of Q345E H Beam

C≤	Si≤	Mn≤	P≤	S≤
0.18	0.50	1.70	0.025	0.020
Nb≤	V≤	Ti≤	Cr≤	N≤
0.07	0.15	0.20	0.30	0.50
Mo≤	B≤	Al≥
0.30	0.012	0.10

Carbon equivalent should be ≤ 0.44

Q345E H Beam Mechanical Property

Grade	Thickness	Tensile Strength Rm/Mpa	Yield Strength ReL/Mpa	Elongation A/%	Impact test temperature
	mm	Min	Min	Min	℃
Q345E	6~40	470-630	335	21	-40
	>40~63	470-630	325	20	-40
	>63~80	470-630	315	20	-40
	>80~100	470-630	305	20	-40
	>100~150	450-600	285	19
	>150~200	450-600	275	18
	>200~250	450-600	265	18
	>250~400	450-600	265	17

learn more:http://www.section-steel.com/News/GB1126389-Q345E-H-Beam-with-Large-Stock.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com  

skype:lisa.liu6282

How does JIS G3101 SS400 Steel Plate compare to other Iron Alloys

SS400 is used in a general structure, such as buildings, bridges, ships, rail vehicles and other structures

Thickness: 6MM to 400MM,

Width: 1500mm to 4050mm,

Length: 3000mm to 15000mm
 

 For more information of SS400 steel plates, please check them in following:

SS400 Chemical Composition
Grade	The Element Max (%)
	P	S	Mn	C	S
SS400	≤0.050	≤0.050	..	…	..

Mechanical Property of SS400 http://www.ice-steels.com/News/How-does-JIS-G3101-SS400-Steel-Plate-compare-to-other-Iron-Alloys.htmlsteel plate	SS400
Tensile strength, Min，Mpa	400-510
Yield strength, thickness	Min，Mpa
6<a≤16mm	≥245
16<a≤40mm	≥235
a>40mm	≥215

learn more:http://www.ice-steels.com/News/How-does-JIS-G3101-SS400-Steel-Plate-compare-to-other-Iron-Alloys.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com  

skype:lisa.liu6282

S235JR H Beam Grade Equivalent to ASTM A36 Steel Material

US Equivalent Grades

EU	US
S235	A283C
S275	A570Gr40
S355	A572Gr50

Chemical Composition of S235, S275 and S355

Grade	C%	Mn%	P%	S%	Si%
S235	0.22 max	1.60 max	0.05 max	0.05 max	0.05 max
S275	0.25 max	1.60 max	0.04 max	0.05 max	0.05 max
S355	0.23 max	1.60 max	0.05 max	0.05 max	0.05 max

S235JR H Beam Key Points:

Grade: A36, s235JR, STS235JR
Standard: JIS, GB, ASTM, EN, DIN
Dimensions:
Flange width: 50mm-300mm
Flange thickness: 8mm-28mm
Web width: 100mm-900mm
Web thickness: 6mm-16mm
Length: 9m, 10m, 12m or as your requirement

learn more:http://www.section-steel.com/News/S235JR-H-Beam-Grade-Equivalent-to-ASTM-A36-Steel-Material.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com

skype:lisa.liu6282

ASME SA516gr70 Steel Plate Mill Test Certification

ASME SA516 Grade 70(SA516GR70) Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel,Boiler,Storage Tanks and Heat Exchanger in Oil,Gas Project.

ASME SA516 Grade 70(SA516GR70) Boiler steel plate,ASME SA516 Grade 70(SA516GR70) Pressure Vessel Steel plate ,ASME SA516 Grade 70(SA516GR70) Storage Tanks Steel plate. ASME SA516 Grade 70(SA516GR70) Heat Exchanger Steel Plate .

 Size demension:

Steel Grade	Thickness	Width	Length
SA516Gr70	8	2300	10000
	185	3815	322
	185	3815	322
	25	2400	12000
	30	2500	11400
	36	2300	10000
	40	2520	8400
	50	2300	10000
	60	2000	10000
	80	2560	10800
	100	2700	8900
	120	2550	10500
	200	2550	3330

  

learn more: http://www.ice-steels.com/News/ASME-SA516gr70-Steel-Plate-Mill-Test-Certification.html

 TEL:0086-21-61182423

Fax :0086-21-61182425
E-mail:service3@katalor.com  

skype:lisa.liu6282

What are the Qualities of Hot Sale 316L Stainless Steel Plate

Grade 316L, the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). There is commonly no appreciable price difference between 316 and 316L stainless steel.

Physical Properties of Type 316 Steels

• Density: 0.799g/cm³
• Electrical resistivity: 74 microhm-cm (20C)
• Specific Heat: 0.50 kJ/kg-K (0-100°C)
• Thermal conductivity: 16.2 W/m-k (100°C)
• Modulus of Elasticity (MPa): 193 x 10³ in tension
• Melting Range: 2500-2550°F (1371-1399°C)
• learn more：http://www.ice-steels.com/News/What-are-the-Qualities-of-Hot-Sale-316L-Stainless-Steel-Plate.html
• TEL:0086-21-61182423
  Fax :0086-21-61182425
  E-mail:service3@katalor.com  
  skype:lisa.liu6282

ASTM A36 SS400 Carbon Seamless Steel Pipe for Building

Common carbon structural steel plate SS400 is most used by tank manufacturers all over the world.The equivalent steel grades are ASTM A36 carbon steel plate,Din 17100 St37-2 structural steel plate,GB Q235B carbon steel plate.Now Xinsteel’s rolling range for mild steel plate SS400 is thickness from 2mm to 650mm,width from 1200-4000mm and length from 3000mm-18000mm.For the thick steel plate of SS400,Xinsteel suggest our customers accept doing Normalised heat treatment for improved steel mechanical property.

SS400 Seamless steel pipe Specifications:
Standard: GB JIS DIN ASTM API and so on
Material: 10#, 20#, 45#, Q345B/16Mn, A106 B, API 5L B, API X52, A333 Gr.6.
OD:16mm-630mm or as customers' requirement
WT:2 - 90 mm
Length: as per your requirement.

SS400 Seamless steel pipe Surface treatment: Painting, oil coating, Anti-corrosion &Insulation.

Inspection:With chemical composition and mechanical properties analysis;hydrostatic test,dimensional

and visual inspection,also with nondestructiv inspection.

learn more： http://www.section-steel.com/News/ASTM-A36-SS400-Carbon-Seamless-Steel-Pipe-for-Building.html

What is the EN10028 P355GH Pressure Vessel Steel Plate Normalization

P355GH is an ideal material for use in pressure vessels, especially in the storage of hot liquids.  It is produced under the Euro Norm standard EN10028 which replaced the older British and German DIN standards.  The material is an equivalent to the American standard grades ASTM A516 Grade 70 and ASME SA516 Grade 70.

1. Material: En10028-2 P355GH boiler steel plate or pressure vessel steel plate

2.Application Potential: P355GH pressure vessels steel plates are all with specified elevated temperature properties. The standard specifies requirement for flart products for pressure vessels equirement made of welded non-alloy steel plates.

3.Relative Grades: P235GH ,P265GH,P295GH,P355GH,16Mo3, 18MnMo4-5, 20MnMoNi4-5, 15NiCuMoNb5-6-4, 13CrMoSi5-5, 10CrMo9-10, 12CrMo9-10, X10CrMoVNb9-1 steel plates------En10028-2

4. Other information:

  (1) P355GH Delivery of condition: N (normalized)

  (2) Other technology requirements:Z Test, UT (ultrasonic test), T (tempered), Q (quenched), Q+T, PWHT (simulated post-weld heat treatment), Elevated Temperature Tension Test) ect.

If you need much further information about P355GH pressure vessel steel plates, please contract us at any time.

learn more:http://www.ice-steels.com/News/What-is-the-EN10028-P355GH-Pressure-Vessel-Steel-Plate-Normalization.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com  

skype:lisa.liu6282