5mm Thickness EN 10028-2 p355GH (1.0473) Steel Plate With Specified Elevated Temperature Properties

EN10028 P355GH steel sheetis a kind of material forboiler and pressure vessel steel. EN10028 P355GH steel plates are characterised by a minimum yield strength of 280-355 MPa and by good weldability,EN10028-2 P355GH Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel, Boiler, Storage Tanks and Heat Exchanger in Oil, Gas Project.

P355GH steel's Chemical analysis

Grade	C. %	Mn.%	S.	N	Cu	Nb	Ti	Si	P	Al	Cr	Mo	Ni	Vi
P355GH	0.10-0.22	0.10-1.70	0.015	0.012	0.30	0.020	0.03	0.60	0.025	0.020	0.30	0.08	0.30	0.02

P355GH steel's Mechanical properties

Grade	Type	Thickness mm	Yield strength Mpa(min)	Tensile Strength MPa	Elongation % (min)	Impact Energy (KVJ) (min)
						-20°	0°	+20°
P355GH	Normalized	≤16 16>to≤40 40>to≤60 60>to≤100 100>to≤150 150>to≤250	355	510-650	20	27	34	40
			345	510-650	20	27	34	40
			335	460-580	20	27	34	40
			315	490-630	20	27	34	40
			295	480-630	20	27	34	40
			280	470-630	20	27	34	40

P355GH Steel Plates are available ex-stock in a wide range of thicknesses and dimensions

1, Thickness: 6 – 150 mm
2, Width: Up to 3 metres wide
3, Length: Up to 12 metres long
We also can supply any size based on customer's requirements

learn more:http://construction-steel.com/News/5mm-Thickness-EN-100282-p355GH-10473-Steel-Plate-With-Specified-Elevated-Temperature-Properties.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com or liulucy.0212@gmail.com

skype:lisa.liu6282