ASTM A36 SS400 Carbon Seamless Steel Pipe for Building

Common carbon structural steel plate SS400 is most used by tank manufacturers all over the world.The equivalent steel grades are ASTM A36 carbon steel plate,Din 17100 St37-2 structural steel plate,GB Q235B carbon steel plate.Now Xinsteel’s rolling range for mild steel plate SS400 is thickness from 2mm to 650mm,width from 1200-4000mm and length from 3000mm-18000mm.For the thick steel plate of SS400,Xinsteel suggest our customers accept doing Normalised heat treatment for improved steel mechanical property.

SS400 Seamless steel pipe Specifications:
Standard: GB JIS DIN ASTM API and so on
Material: 10#, 20#, 45#, Q345B/16Mn, A106 B, API 5L B, API X52, A333 Gr.6.
OD:16mm-630mm or as customers' requirement
WT:2 - 90 mm
Length: as per your requirement.

SS400 Seamless steel pipe Surface treatment: Painting, oil coating, Anti-corrosion &Insulation.

Inspection:With chemical composition and mechanical properties analysis;hydrostatic test,dimensional

and visual inspection,also with nondestructiv inspection.

learn more： http://www.section-steel.com/News/ASTM-A36-SS400-Carbon-Seamless-Steel-Pipe-for-Building.html

What is the EN10028 P355GH Pressure Vessel Steel Plate Normalization

P355GH is an ideal material for use in pressure vessels, especially in the storage of hot liquids.  It is produced under the Euro Norm standard EN10028 which replaced the older British and German DIN standards.  The material is an equivalent to the American standard grades ASTM A516 Grade 70 and ASME SA516 Grade 70.

1. Material: En10028-2 P355GH boiler steel plate or pressure vessel steel plate

2.Application Potential: P355GH pressure vessels steel plates are all with specified elevated temperature properties. The standard specifies requirement for flart products for pressure vessels equirement made of welded non-alloy steel plates.

3.Relative Grades: P235GH ,P265GH,P295GH,P355GH,16Mo3, 18MnMo4-5, 20MnMoNi4-5, 15NiCuMoNb5-6-4, 13CrMoSi5-5, 10CrMo9-10, 12CrMo9-10, X10CrMoVNb9-1 steel plates------En10028-2

4. Other information:

  (1) P355GH Delivery of condition: N (normalized)

  (2) Other technology requirements:Z Test, UT (ultrasonic test), T (tempered), Q (quenched), Q+T, PWHT (simulated post-weld heat treatment), Elevated Temperature Tension Test) ect.

If you need much further information about P355GH pressure vessel steel plates, please contract us at any time.

learn more:http://www.ice-steels.com/News/What-is-the-EN10028-P355GH-Pressure-Vessel-Steel-Plate-Normalization.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com  

skype:lisa.liu6282

31.88*1.5mm ASME SA210C Carbon Steel pipe Factory Price

Characteristic of ASME SA210C

With good finish, high corrosion resistance and pressure-withstanding capacity

SA210C Carbon Steel Chemical Composition

Grade	C(Max)	Mn	Si(Min)	Cu(Max)	Ni(Max)	Cr(Max)	Mo(Max)	V(Max)	P(Max)	S(Max)
A	0.25	0.27~0.93	0.10	0.40	0.40	0.40	0.15	0.08	0.035	0.035
B	0.30	0.29~1.06	0.10	0.40	0.40	0.40	0.15	0.08	0.035	0.035
C	0.35	0.29~1.06	0.10	0.40	0.40	0.40	0.15	0.08	0.035	0.035

Mechanical properties of SA210C

Standard codes	Models of steel tubes	Tensile strength(MPa)	Yield strength(MPa)	Elongation (%)	Hardness
ASME SA210	SA210A-1	≥415	≥255	≥30	≤143HB
	SA210C	≥485	≥275	≥30	≤179HB

Key Points of ASME SA210C

Product Name: carbon steel pipe sa210c
OD: 1/2~18''
Thickness: 0.8-12mm
Length: 2/3/4/5.8/6/8/9/12m and other size according to the contract
Steel material: Q195, Q215, Q235, Q345, (Chinese Standard. Other Material Can Be Ordered)
Standard: BS, GB, ASME, ASTM, DIN, ASNI
Surface: Bared or Painted, Galvanized or With Oiled or Client Option
Inspection: With Hydraulic Testing, Eddy Current, Infrared Test

learn more:http://www.section-steel.com/News/318815mm-ASME-SA210C-Carbon-Steel-pipe-Factory-Price.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com  

skype:lisa.liu6282

What is the Difference between Type 201,304,316 Stainless Steel Plate

Description:

Type 201 Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen. It is non-hardenable by thermal treatment, but may be cold worked to high tensile strengths. Type 201 is essentially nonmagnetic in the annealed condition and becomes magnetic when cold worked. Type 201 can be substituted for Type 301 in many applications.

Type 201,304,316 Stainless Steel Product Forms:

Sheet, Strip

Type 201,304,316 Stainless Steel Specifications:

ASTM A240, A666

Typical Applications of Type 201,304,316 :

Typical applications for Types 201 are cookware, hose clamps, piston rings, transit car structural member, transit car roofing/siding, thermal window spacers, air bag containers, and truck trailer posts and door frames.

learn more:http://www.ice-steels.com/News/What-is-the-Difference-between-Type-201304316-Stainless-Steel-Plate.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com  

skype:lisa.liu6282

ASME SA-213 T23 Steel Pipe in the American standard

Key Words: T23 datasheet, T23 mechanical properties, chemical element T23, technical specifications of T23 steel material properties. T23 performance specifications.

T23 Chemical composition (%):

Grade	C≤	Mn≤	P≤	S≤	Si≤	Cr≤	Mo≤	V
T23	0.04~0.10	0.10~0.60	0.03	0.010	0.50	1.90~2.60	0.05~0.30	0.20~0.30
	W	Nb	N	Al	B
	1.45~1.75	0.02~0.08	0.40	0.030	0.0005~0.006

Application of ASME SA-213 T23

1, oiler super heater and heater tubes and water wall panels
2, Headers and steam piping in fossil-fuelled power plants
3, Repair and revamping projects involving the replacement of steels such as ASTM T/P22 (EN10216-2 10CrMo9-10), T/P12 (13CrMo4-5) or 14MoV6-3.

learn more:http://www.section-steel.com/News/ASME-SA213-T23-Steel-Pipe-in-the-American-standard.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com  

skype:lisa.liu6282

GB713 Q345R(R-HIC) Pressure Vessel Steel Plate Product Feature

Boiler steel plate Q345R is the most used materials to build specified elevated boilers and pressure vessels.Q345R owned the minimum yield strength at 345 Mpa for thin thickness and tensile strength above 510 Mpa.The best equivalent steel grade with Q345R is A516 Grade 70 in specification ASTM A516/A516M.

Key Points of GB713 Q345R(R-HIC)

1. Product: Boiler and Pressure Vessel Steel Plate
2. Hardness:
Hardened & tempering hardness: 28~34HRC
Annealing hardness: HBS<=235
3. Size specification:
Thickness: 2-300MM
Width: 1000-3000MM
Length: 1-12m, as you request
we can supply any size based on customers requirements
4. Shape: Coil/ sheet / plate...
5. Surface condition: Black surface / Grinding / Polishing / Milling / Machined...
6. Process: EAF + LF + VD + HOT ROLLED + Heat Treatment (optional)


learn more: http://www.ice-steels.com/News/GB713-Q345RRHIC-Pressure-Vessel-Steel-Plate-Product-Feature.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com  

skype:lisa.liu6282

Hot Sale 441 Rolled Stainless Steel Plate Competitive Price Per KG

Type 441 (UNS S44100) is a ferritic rolled coil stainless steel with a niobium (columbium) addition that has good oxidation and corrosion resistance, as well as good high-temperature strength. 441 is similar to AK Steel 18 Cr-Cb™.

441 rolled coil stainless steel is used mainly for high-temperature settings and corrosive environments, particularly automotive-exhaust system components.

Chemical Composition of441 Stainless Steel:

Element	UNS 43940	EN 1.4509
Carbon	0.030 max.	0.030 max.
Manganese	1.00 max.	1.00 max.
Sulfur	0.015 max.	0.015 max.
Phosphorus	0.040 max	0.040 max.
Silicon	1.00 max.	1.00 max.
Chromium	17.5 – 18.5	17.5 – 18.5
Titanium	0.10 – 0.60	0.10 – 0.60
Nitrogen	-	0.045 max.
Niobium	0.30+(9xC) min.	0.30+(9xC) min.– 1.00 max.

learn more:http://www.ice-steels.com/News/Hot-Sale-441-Rolled-Stainless-Steel-Plate-Competitive-Price-Per-KG.html

TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:service3@katalor.com  

skype:lisa.liu6282